New Products
Check back here often to see our new product releases.
We are constantly expanding our collection of kits, accessories, as well as creating new parts in our in-house machine shop.
Oil Pan & Rear End Plugs
We now have stainless oil pan plugs and rear end plugs. The oil pan plugs come in 1/2"-20 button head (3/4" OD Flange).
The rear end plugs for Ford 9" (1" OD Flange). They are button head or square flange head style. They come in 5/8"-18 (1" OD Flange) or 3/4"-16 (1 1/8" OD Flange).
The 1-20 rear end plugs for 1950's GM cars & Trucks (1 3/8" OD Flange). These come in button head or square flange head (O.E.M. Style).
We have 22.5mm Plugs for the GM 4x4 transfer cases. This plug comes in button head style. (1 1/4" OD Flange).
We also have 3/4" pipe thread rear end plugs for 1960's GM. These come in square flange head. (1 1/4" OD Flange).
Air Cleaner Nuts
We now have custom polished stainless steel air cleaner nuts. These were made in our in-house machine shop.They come in 1/4"-20 (most carbs have this size) and 5/16"-18.
High Stength Slotted Tall Nuts - (Castle Nuts)
These castle nuts are machined in our machine shop. We machine the height to match your specific needs by specifying the distance from the bottom of nut to bottom of the slots. The sizes: 7/16", 1/2", and 9/16" are made from 17-4PH Stainless. They have a minimum of 110,000 yield strength. The sizes 5/8" and 3/4" are made from 304 stainless with a minimum of 70,000 yield strength.
Stud Bolts
We now are offering stainless steel stud bolts. We custome make these in our in-house machine shope. They Include flanges nuts. The kits are available now for Buick nailhead (water crossover & head bolts), Olds V8 (water pump & timing cover), Pontiac (intake), Ford (stud bolts).
- Any combination of threads (coarse, fine, or both)
- 3/16" thru 3/4" Diameter. (Low Strength)
- 3/8" thru 3/4" Diameters also are available in 17-4PH heat treated high strength stainless steel.
Door Strikers Bolts & Washers
These door strikers are made from 17-4PH high strength stainless steel. They are available in small or large bear claw. They come with the correct heavy duty washers. If you need a special size made contact us with dimensions, we can machine these for nearly any application.
Brake and Fuel Line Clamps
The clamps are made from 18-8 Stainless Steel. They come in single or double lines.The inner diameter of the bolt holes are 13/64" (.204). The are best sucured down with a #10 screws. The are free of burrs and have a bright finish.
Button Head Sheet Metal Screws
These screws are available in 3/8, 1/2, 5/8, 3/4, and 1" lengths.
Custom Made U-Bolts
The custom made u-bolts come in any width between 1 1/6"- 6 1/16" and depth up to 60". 3/16" thru 3/4" diameter comes in 303 stainless (low strength). The sizes 1/2" and 5/8" are made from 17-4PH heat treated and high strength stainless steel.
Harmonic Balancer Kits
The harmonic balancer kits are available for a variety of vehicles. They are high strength stainless steel bolts. (higher strength than grade 8). The washer is custom made to O.E.M. size.